Document Type
Article
Publication Date
12-22-2024
Abstract
Herein, we present an analysis, design, and experimental testing of modular prestressed pin-jointed structures constructed from bistable units and inspired by the classical triangular tensegrity prism. Tensegrity structures, characterized by a combination of tension members (cables) and compression members (bars) in a self-equilibrated state, have gained significant attention in engineering over the past two decades due to their unique nonlinear mechanical behavior. The discontinuity of the compression members in tensegrity structures leads to a slightly different failure behavior compared to their lattice structure counterparts, with unprecedented applications. However, traditional fabrication and assembly methods have posed challenges for their widespread adoption. This research benefits from a recently introduced innovative approach for designing and fabricating bistable “tensegrity-like” units where there exists no flexible element in its structure. Vat photopolymerization technology was utilized to create compliant mechanisms based on a triangular tensegrity prism. Two types of structures, namely a double tensegrity-like unit cell and a lattice structure incorporating the triangular tensegrity prism, were fabricated. Quasi-static compression tests were conducted along with high strain rate experiments were conducted using a specialized direct-impact Hopkinson pressure bar setup. Compression tests at both low and high strain rates confirmed the reliable activation of the designed bistable twisting mechanism, even under large displacements, without the need for self-stress. Experimental results at low and high strain rates demonstrated that these low-density units (relative density of 20%) with bistable characteristics are well-suited for applications requiring highly customizable multistable metamaterials. Here, a sudden transition event (snapping), was clearly seen in both quasi-static and dynamic tests. This, indeed, shifts the structure into a secondary stable configuration while maintaining the twisting mechanism throughout the loading cycles. Overall, this study presents a promising avenue for the design and application of tensegrity-like units in various engineering contexts, demonstrating the effectiveness of tensegrities to carry external loads across a wide range of strain rates.
DOI
10.1016/j.ijimpeng.2024.105208 ; SSRN pre-print version: 10.2139/ssrn.4846043
Source Publication
International Journal of Impact Engineering (ISSN 0734-743X | e-ISSN 1879-3509)
Recommended Citation
Davami, K., Rowe, R., Gulledge, B., Park, J., Beheshti, A., Palazotto, A., Tavangarian, F., & Beck, S. (2025). Dynamic analysis of additively manufactured tensegrity structures. International Journal of Impact Engineering, 198, 105208. https://doi.org/10.1016/j.ijimpeng.2024.105208
Comments
AFIT Scholar hosts the preprint version of this work as sourced from the the SSRN preprint repository. The preprint is shared in accordance with rules posted on the Open Policy Finder.
The published version of record for this article appears in Volume 198 of International Journal of Impact Engineering as cited, and is available to subscribers through the DOI link below. (Elsevier ScienceDirect site).