Performance Losses in Additively Manufactured Low Thrust Nozzles

Date of Award

3-2017

Document Type

Thesis

Degree Name

Master of Science in Astronautical Engineering

Department

Department of Aeronautics and Astronautics

First Advisor

Carl R. Hartsfield, PhD

Abstract

The goal of this research is to evaluate, both analytically and experimentally, the suitability of additive manufacturing in the production of small scale thruster nozzles for low thrust orbital propulsion applications. Current high temperature metallic additive manufacturing processes, like Direct Metal Laser Sintering, typically result in untreated part surfaces with higher roughness than traditional machining processes. For large scale rocket applications, nozzle wall roughness, and the associated boundary layer effects, may safely be ignored. However, in nozzles with throat diameters on the order of ten-thousandths of an inch, any viscous effects originating at the nozzle walls must be considered. It is likely that, even at the low flow Reynolds numbers exhibited in low thrust applications, the effects of viscous losses at the nozzle walls are affected by an increase in nozzle surface roughness. The first phase of this research focuses on the design and implementation of an analytic model to predict losses in thrust coefficient due to viscous effects. During the second phase, a variety of nozzle configurations are tested in a laboratory environment to determine the accuracy of the analytic model and to identify additional modes of performance loss associated with increased surface roughness.

AFIT Designator

AFIT-ENY-MS-17M-295

DTIC Accession Number

AD1055372

Comments

The "Link to Full Text" on this page opens or downloads the full thesis, depending on browser settings.

The PDF file is hosted at the Defense Technical Information Center (DTIC), and the DTIC record for the thesis is linked out from the DTIC accession number field.

Link to Full Text

Share

COinS